• AGS-300 Prestressed Automatic Grouting Control System

AGS-300 Prestressed Automatic Grouting Control System

prestressed, Products | January 10, 2024 16:38

This system is suitable for bagged pre-mixed compression slurry can automatically control the amount of water according to the number of bags to be loaded. Automatic water loading, bag loading, simpler structure, higher efficiency.

Model Number:  AGC-300

Brand:  VECT Xi'an Wanshuo Electronic

Type:  Prestressing Intelligent Grouting Control System

Product Features:  Flow Control, Platform Management, 4G Module

AGS-300 is suitable for bagged pre-mixed grout, automatic watering, bag loading, simpler structure, higher efficiency, the use of integrated special controller, independent function, reliable and durable.

Product Introduction

The AGS-300 is a new automatic grouting control system developed for premixed grouts. Batching link: AGS-300 can automatically control the amount of water according to the number of feeding bags, and then pour the emulsion material into a bag into the mixing bucket for stirring. Grouting session: AGS-300 supports two modes of switching control and constant voltage frequency conversion control, suitable for various models. Compared with traditional equipment, in the project of using pre-mixed grouting material, the efficiency of AGS-300 batching is not only significantly improved, but also due to the cancellation of the feeding lifting part, the mechanical structure of the whole machine is simpler, the cost is lower, the failure rate is low, and the maintenance is more convenient.

Product Features

  • On-water control with flow;
  • Support 2 jacks pressure and 2 jacks flow monitoring, suitable for large-cycle grouting, vacuum grouting and other different needs;
  • Support 4 motor control and 1 channel inverter control, suitable for constant pressure grouting;
  • Using 5-inch TFT LCD screen, the picture is clear and concise and easy to operate;
  • Built-in physical buttons eliminate the need for additional external buttons;
  • The signal processing section is designed with precision, low-drift devices to ensure signal acquisition accuracy;
  • Multiple interface protection, ESD electrostatic protection, output current limiting, short circuit protection, input overvoltage, overcurrent protection, perfect protection can make the equipment even in the case of short circuit of the signal line to minimize the occurrence of failure, reduce maintenance and after-sales costs;
  • Independent wiring harness, quick to plug and unplug, easy to exchange accessories to troubleshoot, quick maintenance;
  • Dedicated hardware design, compared with general-purpose platforms such as general-purpose PCs or PLCs, is more conducive to cost allocation, and the product reliability is higher under the same production cost;
  • Critical devices are designed for increased redundancy to extend the mean time between failures
  • The software is based on RTOS real-time operating system operation, compared with the non-real-time operating system of similar products, the time control is accurate and the response is timely, which is conducive to ensuring the control accuracy, while cutting useless functions, ensuring that the system is streamlined and reliable;
  • Adaptive batching and grouting control algorithm, part of the control parameters can be adjusted on site, easy to calibrate, widely adapt to a variety of different structures and different working conditions;
  • Easy operation logic and support for automatic/manual switching to handle a wide range of situations;
  • Accurate recording of grouting and batching data with tamper-proof functionality;
  • Through the 4G network, data can be viewed and downloaded remotely at any time, and third-party platforms can be connected;

Basic parameters

Cut-out size205*50mm
Display size5 inches
Weigh the interface1; digital signal
Pressure interface2;  4-20mA Analog current interface
Traffic interface2
Control the output4;  24V/1A Drive capability
Frequency conversion interface1 voltage speed regulation+1 start signal
Temperature interface2;NTC
Supply voltage24V